Preparation
- 10 -
Insert the battery into the camera to charge it.
• Check that this unit is turned off.
Slide the release lever in the
direction of the arrow and open the
card/battery door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot
guarantee the quality of this product.
Being careful about the battery
orientation, insert all the way until
you hear a locking sound and then
check that it is locked by lever
A
.
Pull the lever
A
in the direction of
the arrow to remove the battery.
1
:Close the card/battery door.
2
:Slide the release lever in the
direction of the arrow.
Note
• Turn the camera off and wait for the “LUMIX” display on the LCD monitor to clear before
removing the battery. (Otherwise, this unit may no longer operate normally and the card itself
may be damaged or the recorded pictures may be lost.)
Inserting the Battery
