- 45 -
Basic
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
•
Calibration is not done if correct position is not touched. Touch the [
K
] mark again.
•
If you set a different language by mistake, select [
~
] from the menu icons to set the desired
language.
•
The Stabilizer function is switched between [ON] and [OFF] every time [Stabilizer] is touched
during the [Stabilizer Demo.].
•
In Playback Mode, [Stabilizer Demo.] cannot be displayed.
•
[Stabilizer Demo.] is an approximation.
•
[Auto Demo] has no TV output capability even when it is in Playback Mode.
[Format]
The built-in memory or card is formatted (Pictures in My Photo
Album are also formatted). Formatting irretrievably deletes all the
data so check the data carefully before formatting.
[Calibration]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1
Touch [Start].
2
Touch the orange [
T
] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•
A message is displayed once the
position is set.
3
Touch [End] to finish.
~
[Language]
Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]
Amount of jitter
Amount of jitter after correction
[Auto Demo]:
[ON]
[OFF]
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
DEMO