- 159 -
Others
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
•
When you set the recording quality to [
], [
] or [
], we recommend using a
high-speed card with “10MB/s” or greater displayed on the package.
•
In the event that it stops even after using a “10MB/s” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format
(P32)
.
•
Depending on the type of SD Memory Card or SDHC Memory Card, motion picture recording
may stop in the middle.
[A FOLDER CANNOT BE CREATED]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
(P138)
>
Format the card after saving necessary data on a PC etc.
(P32)
If you execute
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.
(P30)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
•
The AV cable is connected to the camera.
>
Press [MENU/SET] if you want to delete this message at once.
>
Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect.
(P31)
•
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer.
(P136
,
139)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
•
The printer cannot print.
>
Check the printer.
[NO BATTERY POWER REMAINS]
•
The remaining battery power is low.
>
Charge the battery.
[THIS BATTERY CANNOT BE USED]
•
The battery cannot be recognised by the camera.
>
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Centre.
•
The battery cannot be recognised as its terminal is dirty.
>
Remove any dirt etc. from the terminal.