Panasonic LUMIX DMC-FX150 Operating Instructions Manual Download Page 63

Page: 63 / 170

- 63 -

Advanced (Recording pictures)

Press the shutter button halfway.

•

The manual exposure assistance

appears for

about 10 seconds to indicate the exposure.

•

Set the aperture value and the shutter speed again

when the exposure is not adequate.

Manual setting screen is displayed when

pressed.

Take the pictures.

∫

Manual Exposure Assistance

•

Manual exposure assistance is an approximation. It is recommended to record by confirming in

playback mode.

Note

•

Brightness of the LCD monitor may differ from the actual picture recorded. Please confirm in

playback mode.

•

If the exposure is not adequate, the aperture value and the shutter speed turn red when the

shutter button is pressed halfway.

The exposure is adequate.

Set to faster shutter speed or larger aperture value.

Set to slower shutter speed or smaller aperture value.

Summary of Contents for LUMIX DMC-FX150











































































































































































Search results

Summary of Contents for LUMIX DMC-FX150

Reviews:

Panasonic LUMIX DMC-FX150, Operating Instructions Manual, Page: 63 / 170

Search results

Summary of Contents for LUMIX DMC-FX150

Reviews: