Others
109
VQT1F66
– Set [NOISE REDUCTION] in
[PICT.ADJ.] to [HIGH] or set every
item except [NOISE REDUCTION] to
[LOW]. (P70)
– Take pictures in bright places.
• In [HIGH SENS.] (P51) in scene mode,
the resolution of the recorded picture
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
8: The brightness or the hue of the
recorded picture is different from the
actual scene.
• If recording under fluorescent light, the
brightness or the hue may change
slightly when the shutter speed
becomes fast. This occurs due to the
characteristics of fluorescent light. It is
not a malfunction.
9: A reddish vertical line appears on
the LCD monitor when the shutter
button is pressed halfway or when
recording motion pictures.
• This is a
phenomenon called
smear. It is a
characteristic of
CCD and appears
when the subject
has a bright part. Black or green vertical
lines may also appear or uneven
colours may appear around the smear.
This is not a malfunction. It is recorded
in motion pictures but is not recorded
on still pictures.
10: Motion picture recording stops in the
middle.
• Are you using a MultiMediaCard?
– This unit does not support
MultiMediaCards.
• When you set the picture quality to
[30fpsVGA], [30fps16:9L] or
[15fps16:9H], we recommend using a
High Speed SD Memory Card with
“10MB/s” or greater displayed on the
package.
• Depending on the type of the card,
recording may stop in the middle.
∫
LCD monitor
1: The LCD monitor sometimes turns
off although the camera is turned on.
• Have you set economy mode? (P19)
– In economy mode, the LCD monitor
turns off while the flash is charged.
2: The LCD monitor becomes darker or
brighter for a moment.
• This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
3: The LCD monitor flickers indoors.
• The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
4: The LCD monitor is too bright or
dark.
• Adjust the brightness of the screen.
(P19)
• Is the power LCD function or high angle
mode activated?
5: Black, red, blue and green dots
appear on the LCD monitor.
• These pixels do not affect the recorded
pictures.
This is not a malfunction. (P104)
6: Noise appears on the LCD monitor.
• In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
DMC-FX100ENG.book 109 ページ ２００７年５月１１日 金曜日 午前１１時３７分