Panasonic Lumix DMC-FT4EB, Service Manual

Page: 33 / 98

33
2. ABOUT EACH SENSOR
2.1. COMPASS
2.1.1. General description
2.1.2. Failure diagnosis of Compass.
The Compass sensor unit is IC9301 which is located on TOP FPC unit.
Since the IC9301 does not supply as a spare parts, replace as a TOP FPC unit if necessary.
Settings/Condition:
1. Release the initial settings to be forcefully turned off the declination adjustment:
2. Turn on the GPS setting.
3. Press the Display button to display the compass, altimeter, & barometer.
4. Select [Calibrate compass] on the [GPS/Sensor] menu, and then press [MENU/SET].
5. Securely hold the unit vertically, and adjust by turning it in a figure 8 a few times rolling your wrist.
The "Calibration successful" is displayed when the adjustment is successful.
Diagnosis:
1. When both of the red arrow of compass unit and camera unit's one point same direction, the built-in compass unit works fine.