Panasonic Lumix DMC-FS20 Operating Instructions Manual Download Page 19

Page: 19 / 151

- 19 -

Preparation

Note

•

Remove the battery after use. Store the removed battery in the battery carrying case (supplied).

•

Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the
settings on the camera may not be stored properly.

•

The supplied battery is designed only for the camera. Do not use it with any other equipment.

•

Before removing the card or battery, turn the camera off, and wait until the status indicator has gone
off completely. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)

Summary of Contents for Lumix DMC-FS20
























































































































































Search results

Summary of Contents for Lumix DMC-FS20

Reviews:

Related manuals for Lumix DMC-FS20

Brands by name

Popular brands

Panasonic Lumix DMC-FS20, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-FS20

Reviews:

Related manuals for Lumix DMC-FS20

Brands by name

Popular brands