VQT1W46
18
Preparation
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
Turn the camera on.
• The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A
[MENU/SET] button
B
Cursor buttons
Press [MENU/SET].
A
: Time at the home area
B
: Time at the travel destination (P59)
‚
: Cancel without setting the clock.
• Select either [24HRS] or [AM/PM] for the time display
format.
• AM/PM is displayed when [AM/PM] is selected.
• When [AM/PM] is selected as the time display format, midnight is displayed as AM
12:00 and noon is displayed as PM 12:00. This display format is common in the US and
elsewhere.
Press [MENU/SET] to set.
• After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to recording mode, and check that the display reflects the settings that were
performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the “Changing the clock setting” procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press
1
. (P20)
• It can be changed in steps
3
and
4
to set the clock.
• The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Press
2
/
1
to select the items (year,
month, day, hour, minute, display
sequence or time display format), and
press
3
/
4
to set.
Changing the clock setting
ON
OFF
/SET
MENU
:
:
DMC-FS15GN-VQT1W46_eng.book 18 ページ ２００８年１２月９日 火曜日 午後７時４６分
