Panasonic Lumix DMC-FS14 Operating Instructions Manual Download Page 15

Page: 15 / 128

- 15 -

Preparation

The AC Adaptor (optional) can only be used with the designated Panasonic DC
Coupler (optional). The AC Adaptor (optional) cannot be used by itself.

Open the card/battery door.

Insert the DC Coupler, being careful of the
direction.

Open the DC Coupler cover

• Push open the Coupler cover from the interior.

Close the card/battery door.

• Ensure that the card/battery door is closed.

Plug the AC Adaptor into an electrical outlet.

Connect the AC Adaptor

to the [DC IN] socket

of the DC Coupler.

Align the marks and insert.

• Ensure that only the AC Adaptor and DC Coupler for

this camera are used. Using any other equipment may

cause damage.

Note

• Always use a genuine Panasonic AC Adaptor (optional).

• When using an AC Adaptor, use the AC cable supplied with the AC Adaptor.

• Some tripods cannot be attached when the DC Coupler is connected.

• Make sure to unplug the AC Adaptor when you open the card/battery door.

• If the AC Adaptor and DC Coupler are not necessary, then remove them from the digital

camera. Also, please keep the DC Coupler cover closed.

• Also read the operating instructions for the AC Adaptor and DC Coupler.

Using an AC Adaptor (optional) and a DC Coupler (optional) instead of the

battery





Summary of Contents for Lumix DMC-FS14

































































































































Search results

Summary of Contents for Lumix DMC-FS14

Reviews:

Panasonic Lumix DMC-FS14, Operating Instructions Manual, Page: 15 / 128

Search results

Summary of Contents for Lumix DMC-FS14

Reviews: