69
DVQP1285
Recording mode
Taking pictures by setting the aperture value and shutter speed
Taking pictures by setting the aperture value and shutter speed
(Manual Exposure Mode)
Determine the exposure by manually setting the aperture value and the shutter speed.
1
Set mode dial to [ ]
2
Turn the control ring to set the aperture value, and turn
the control dial to set the shutter speed
•You can switch the setting operation of control ring and control
dial by pressing .
Aperture value
Shutter speed
Manual Exposure Assist
Exposure meter
Aperture values that
can be set
*
1
Shutter speeds that can be set
(seconds)
F3.3 - F8.0
4
*
2
- 1/2000
(When the mechanical shutter is used)
1
*
2
- 1/16000
(When the electronic shutter is used)
*
1
You may not be able to select some values depending on zoom
position.
*
2
Varies depending on the setting of ISO sensitivity.
(→
8
15
30
60
125
8.0
4.0
5.6
Optimizing the ISO sensitivity for the aperture value and shutter speed
When the ISO sensitivity is set to [AUTO], the camera sets the ISO sensitivity automatically so that the
exposure will be appropriate for the aperture value and shutter speed.
•Depending on recording conditions, an appropriate exposure may not be set or the ISO sensitivity
may become higher.
Manual exposure assist (estimate)
Shows pictures with standard brightness (appropriate exposure).
Shows brighter pictures. For the appropriate exposure, either use a faster shutter
speed or increase aperture value.
Shows darker pictures. For the appropriate exposure, either use a slower shutter
speed or reduce aperture value.
