54
10.2.2. Flash-ROM Data Backup
Number of necessary adjustment items decreases by copying the backup data to new Main P.C.B. when adjustment data in old
Main P.C.B. is usually read by ROM_BACKUP “DSC
→
SD”.
It is recommended to backup the Flash-ROM data as the way of return when trouble occurs before disassembling the unit depend-
ing on each case.
[ ROM_BACKUP (Method of Non-PC backup) ]
1. Insert the memory card into the unit.
2. Set the camera to “Temporary cancellation of the initial settings”.
3. Select the “SETUP” menu.
From the “SETUP” menu, select “ROM_BACKUP”.
NOTE:
This item is not listed on the customer's “SETUP” menu.
4. When this “ROM_BACKUP” item is selected, the following submenus are displayed.
Fig.2-1
Summary of Contents for Lumix DC-LX100M2EB
