Recording
41
(ENG) DVQX1493
4
Press the shutter button fully to start
recording.
• The focus point changes automatically while
recording. When the icon (
B
) disappears,
recording automatically ends.
• A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus
area will be displayed. (P41)
∫
Cancelling [Post Focus]
Select [OFF] in step
2
.
• The camera stops operating for self-protection in the manner described below when
overheated due to, for example, high ambient temperature or recording using the Post
Focus function. Wait until the camera cools down.
– Continuous recording, motion picture recording, and the Wi-Fi connection will be
temporarily disabled.
– If you continue recording even when [
] is flashing on the screen, a message will
be displayed and the camera will turn off automatically.
1
Select an image with the [
] icon on the playback
screen, and press
3
.
2
Touch the desired focus area.
• If a picture that is in focus is not available for the
selected area, a red frame will be displayed. You
cannot save a picture in this case.
• You cannot select the edges of the screen.
From the time you press the shutter button
halfway until the end of recording:
• Maintain the same distance to the subject and
the same composition.
• Do not operate the zoom.
Selecting the desired focus area and saving a picture
Fn3
Fn1
DC-GF10_GAGH-DVQX1493_eng.book 41 ページ ２０１８年１月１２日 金曜日 午前９時４５分