Panasonic Lumix DC-GF10, Operating Instructions For Advanced Features

Page: 313 / 330

313
12. Others
• Is [Focus/Release Priority] in the [Custom] menu set to [FOCUS]? (P206)
You cannot take a picture until the subject is brought into focus.
• Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to P322 when the image sensor gets dirty.
• Is the AE Lock (P113) applied incorrectly?
• Is the drive mode set to a mode other than [Single]? (P138)
• Are you using the bracket function? (P142)
• The subject is beyond the focus range of the camera.
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
(P206)
• Is [Shutter AF] in the [Custom] menu set to [OFF]? (P204)
• Is the AF Lock (P113) applied incorrectly?
• The shutter speed will become slower and the Image Stabiliser function may not work properly
when taking pictures especially in dark places.
> We recommend using a tripod and the self-timer (P141) when taking pictures with a slow
shutter speed.
• Are you using a lens which supports the Stabiliser function? (P17)
• Try the following:
>
Decrease the ISO sensitivity. (P116)
>
Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of
the items other than [Noise Reduction].
(P184)
>
Set the [Long Shtr NR] to [ON]. (P196)
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
The recorded picture is whitish.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred.
The Image Stabiliser is not effective.
The recorded picture looks rough.
Noise appears on the picture.