Metering / Exposure / ISO Sensitivity – Exposure Compensation
298
•
In [M] mode, you can compensate the exposure by setting the ISO sensitivity to
[AUTO].
•
When the exposure compensation value falls below or exceeds ±3 EV, the
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
•
The set exposure compensation value is stored even if you turn off the camera.
•
The standard value for standard exposure can be adjusted:
(
[Exposure Offset Adjust.]: 560
•
You can set the exposure compensation value to be reset when the camera is
turned off:
(
)
•
You can change the operation of the [
] button:
(
)
•
Exposure Bracket can be set and flash output can be adjusted on the exposure
compensation screen:
(
[Exposure Comp. Disp. Setting]: 572
•
You can assign the function that matches the aperture value and shutter speed to
the standard exposure to an Fn button:
(
