51
Recording
(ENG) DVQX1324
• The camera will perform burst recording of a 6K/4K photo and saves it as a 6K/4K burst file with
a [Rec Format] setting of [MP4].
• When [Auto Review] is enabled, the picture selection screen will be displayed automatically.
• When the ambient temperature is high or 6K/4K photo recording is performed
continuously, the camera may display [
] and recording may stop. If you are using
[6K/4K Pre-Burst], the setting will switch to [6K/4K Burst] and recording will stop. Wait
until the camera cools down.
• When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster and the
camera temperature rises. Use these functions only when recording with them.
∫
Adding markers to select and save pictures ([6K/4K Burst(S/S)])
You can add markers if you press [Fn2] during recording. (Up to 40 markers per recording)
When selecting and saving pictures from a 6K/4K burst file, you can skip to the positions
where you added markers.
∫
Setting Pre-Burst Recording ([6K/4K Burst]/[6K/4K Burst(S/S)])
The camera starts recording approximately 1 second before the shutter button is pressed
fully, so you will not miss a photo opportunity.
• Auto Focus operation settings and menus that cannot be set while this function is in use are the
same as those during [6K/4K Pre-Burst] operation.
1
Select an image with the [
] or [
] icon on the playback
screen, and press
3
.
• If the image was recorded with [6K/4K Pre-Burst], proceed to step
3
.
2
Drag the slide bar to make a rough selection of
scenes.
3
Drag the frames to select the frame you want to save
as a picture.
• To continuously rewind/forward frame-by-frame, touch and
hold [
]/[
].
4
Touch [
] or [
] to save the picture.
• A confirmation screen will be displayed.
• The picture will be saved in JPEG format.
>
[Rec]
>
[6K/4K PHOTO]
>
[Pre-Burst Recording]
>
[ON]
Selecting pictures from 6K/4K burst file and saving
MENU
Fn1
DC-G9LMBodyEB-DVQX1324_eng.book 51 ページ ２０１７年１１月１３日 月曜日 午前１０時４１分