Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 294 | Manualshive

Page: 294 / 342

Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 294

11. Connecting to other equipment

294

Playing Back Pictures on a TV Screen

Preparations: Turn this unit and the TV off.

1

Connect the camera and the TV with an HDMI cable.

• Check the direction of the terminals and plug in/out straight holding onto the plug.

(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely
or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.

2

Turn on the TV and select the input to match the connector in use.

3

Turn the camera on and then press [

(

].

A

[HDMI] socket (Type A)

B

HDMI cable

C

HDMI socket (on the TV)

• Use a “High Speed HDMI cable” with the HDMI logo.

Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long)

• Check the [HDMI Mode (Play)].

• No picture is displayed on the screen of this unit.

• If the ambient temperature is high or a signal is continuously output via HDMI, after [

] is

displayed, the HDMI signal output may stop to protect the camera. Wait until the camera cools
down.

• Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the

left and right of the pictures.

• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• HDMI output will be cancelled if a USB connection cable (supplied) is connected

simultaneously.

• Depending on the TV to be connected, 6K/4K burst files may not be played back correctly.
• No sound is output from the camera speakers.
• Read the operating instructions for the TV.

HDMI

«
...
292
293
294
295
296
...
»

Summary of Contents for Lumix DC-G9























































































































































































































































































































































Reviews:

No comments