Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 203

Page: 203 / 342

203

9. Using Menu Functions

Applicable modes:

Select the luminance range to match the use of video.
• [Luminance Level] can be set only when [MP4] has been selected as the [Rec Format] setting.

Settings: [0-255]/[16-255]

• This function works only for motion pictures. Still pictures (including those you take during

motion picture recording) will be taken with [0-255].

Applicable modes:

The shutter speed can be fixed to reduce the flicker or striping in the motion picture.

Settings: [1/50]/[1/60]/[1/100]/[1/120]/[OFF]

[Motion Picture] menu

• [Rec Format]

• [Rec Quality]

• [AFS/AFF]

• [Continuous AF]

• [Photo Style]

• [Filter Settings]

• [Luminance Level]

• [Metering Mode]

• [Highlight Shadow]

• [i.Dynamic]

• [i.Resolution]

• [ISO Sensitivity (video)]

(P172)

• [Shading Comp.]

(P195)

• [Diffraction Compensation]

• [Stabilizer]

• [Flkr Decrease]

• [Ex. Tele Conv.]

• [Digital Zoom]

• [Picture Mode in Rec.]

• [Time Stamp Rec]

• [Mic Level Disp.]

• [Mic Level Adj.]

• [Mic Level Limiter]

(P169)

• [Wind Noise Canceller]

[Wind Cut]

• [Lens Noise Cut]

• [Special Mic.]

• [Sound Output]

[Luminance Level]

[Motion Picture]

[Luminance Level]

[Flkr Decrease]

[Motion Picture]

[Flkr Decrease]

Summary of Contents for Lumix DC-G9























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-G9

Reviews:

Panasonic Lumix DC-G9, Operating Instructions For Advanced Features, Page: 203 / 342

Search results

Summary of Contents for Lumix DC-G9

Reviews: