Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 326 | Manualshive

Page: 326 / 342

Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 326

12. Others

326

• You may not be able to record for a short while after turning this unit on when using a large

capacity card.

• Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating

required for the card differs. Use a card that meets the rating.

• With recording in a quiet environment, depending on the lenses used, the sound of aperture

and focus actions may be recorded in motion pictures.
Focus operation can be set to [OFF] in [Continuous AF]

• While recording motion pictures, plugging the aperture of the microphone with a finger may

reduce the level of audio recording or audio may not record at all. Also be careful because the
operation sound of lenses can easily be recorded at this time.

• We recommend recording in Creative Video Mode if you are concerned about operational

sounds.

• When the electronic shutter is used, the flash is not activated.

• When [Silent Mode] is set to [ON], the flash is not activated.

Motion pictures

Recording motion pictures is not possible.

Motion picture recording stops in the middle.

In motion pictures, abnormal clicking and buzzing sounds are recorded.
The recorded sound is very quiet.

An operation sound is recorded in a motion picture.

Flash

The flash is not activated.

«
...
324
325
326
327
328
...
»

Summary of Contents for Lumix DC-G9























































































































































































































































































































































Reviews:

No comments