Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 101 / 240

101
4-3 Signals and Details of I/O Connector
The I/O connector is loaded with the input/output for data setting such as selecting a number and the input/output for the
specific functions.
„
List of signals
No. Name
1 IN COM. 2
Input common 2
2 SET IN
3 D0 IN
4 D1 IN
5 D2 IN
6 D3 IN
7 D4 IN
8 D5 IN
9 D6 IN
10 D7 IN
11 D8 IN
12 D9 IN
13 D10 IN
14 D11 IN
15 D12 IN
16 D13 IN
17 D14 IN
18 D15 IN
19 SELECT 0 IN
20 SELECT 1 IN
21 SELECT 2 IN
22 TIME HOLD IN
23 GUIDE IN
Guide laser radiation input
24 TIMING IN
25 RESERVE
System reservation
26
No. Name
27 OUT COM. 2
Output common 2
28 SET OK OUT
29 DATE GAP OUT
30 COUNT END A OUT
31 COUNT END B OUT
32 COUNT END C OUT
33 COUNT END D OUT
34 CHECK OK OUT
35 CHECK NG OUT
36 TIMING WAIT OUT
37 SCRIPTING OUT
38 DATA WAIT OUT
39 SHUTTER OPEN OUT
40 LASING OUT
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• IN COM. 1, OUT COM. 1 of the I/O terminal block and IN COM. 2, OUT COM. 2 of the I/O connector are independent.
If you use the I/O connector terminal, connect input common/output common of the I/O terminal block and the I/O
connector to power supply respectively.
• Do not connect anything to RESERVE terminals.
• For the pin arrangement of the I/O connector, refer to “4-1 I/O Interface Specification” (P.91).
ME-LPRH-SM-3