A-7
English
6.3 GENERAL PERFORMANCE
➀
Power requirement
+5 V 2.7 A max
➁
Dimensions (W x H x D)
101.6 x 25.4 x 150 mm (exclude Front Bezel)
➂
Weight
475
g
typ.
6.4 ENVIRONMENTAL CONDITIONS
Operating
Non-operating
• Temperature
5 ~ 45 °C
–30 ~ 60 °C
• Humidity
20 ~ 80 %Rh
5 ~ 90 %Rh
• Max. wet bulb temp.
29 °C
29 °C
(Non-condensation)
(Non-condensation)
6.5 PICK UP LASER
• Type
Semiconductor laser GaAlAs
• Wave Length
795 ± 20 nm
• Divergence
θ
v
= 30° ~ 36°
• Output power
3.6 mW
CHAPTER 7 BEFORE REQUESTING SERVICE
7.1 TROUBLESHOOTING
(1) There are many kinds of problems caused by misuses. When a problem occurs,
check the table below which describes possible problems occurring with your
SuperDisk drive.
(2) If the SuperDisk drive does not operate correctly and you cannot restore operation
by the following detailed procedures in the table, do not remove the cover of the
units or adjust further.
(3) In the case of (2) above, unplug the unit and consult with your dealer or the nearest
service station.
TROUBLE
• SuperDisk drive does not
operate and Busy Indicator
does not light.
CORRECTION
➀
Ensure that the connection between the SuperDisk
drive and the host computer is correct.
➁
Ensure that the Device Driver installation has been
completed.
➂
Ensure that the setting drive select switch is correct.
➃
Ensure that the disk has been inserted label side up and
shutter side head.
➄
Ensure that foreign objects are not inserted.
