Panasonic LCD-201803, Technical Manual, Page: 59 / 61

<Disassemble> <Assemble>
1.Remove the terminal
cover and all screws
for rear cover.
*There are screws on
the bottom side also.
2. Pull the bottom of
rear cover towards
yourself.
From design concept, the rear cover structure for some model is changed. The screws are decreased
and there are hooks on the rear cover.
Rear Cover Disassemble / Assemble -1
Target model : 65/55/49FX700-73# , 740 for Oceania ( 75/43 inch is same as previous model)
1. Put the rear cover shift from top edge, adjust
the hook of rear cover to the hole of the panel.
2. Slide the rear cover to the top end of
the panel at right side and left side.
3. Push the circumference of rear cover and
fit it. Check that there is no floating and
fix all the screws.
3. Slide the rear cover
downward direction
then remove the rear
cover.
Slide downward
*There are some screws
on the bottom side also.
The number is depend
on the size.
Refer to next page.
Slide upward
<Side View>
Metal for wall mount screw
Panel
Rear Cover
Slide
upward
Boss for putting on the metal
when standing the unit
hole hook
59