E
NGLISH - 11
Prep
arat
ion
Read this first
When you start the projection for the first time or after the projector is initialised, the minimum required setting screen
for projection will be displayed.
J
LANGUAGE
Select the required language setting.
Press
F
G
I
H
buttons of the remote control or
control panel on the projector to highlight the
required language, and press the
ENTER
button to
proceed to the next setting.
J
OPTION
Select the current projection method and fan speed
setting. If you need return to the previous setting,
press the
RETURTN
button.
INSTALLATION
Press
I
H
buttons of the remote control or control
panel on the projector to select the required
installation method. Press
G
to proceed to the
ALTITUDE
setting.
ALTITUDE
If you use the projector at high elevation, the
ALTITUDE
setting need to be
HIGH
to set the fan
speed high. Press
I
H
to select the required
option. If you need to return to the
INSTALLATION
,
press
F
.
LOW
The fan speed is low.
HIGH
The fan speed is high.
Press the ENTER button to start the projection.
Once you finish the minimum requirement setting, it will not be displayed again unless the projector is
initialised. See “INITIALIZE ALL” on page 36.
You can change each settings in the main menu. See “Menu Navigation” on page 27.
Minimum required setting screen
LANGUAGE
SELECT
ENTER
PLEASE SELECT LANGUAGE
INSTALLATION
OPTION
FRONT/DESK
ALTITUDE
LOW
SELECT
ENTER
RETURN
SWITCH TO HIGH ALTITUDE MODE "HIGH" IF OVER 1400m(4593Ft).
FRONT/DESK
Setting on a desk/floor and
projecting from front
FRONT/CEILING
Mounting in the ceiling and
projecting from front
REAR/DESK
Setting on a desk/floor and
projecting from rear
REAR/CEILING
Mounting in the ceiling and
projecting from rear
NOTE:
• At 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, the
setting must be
HIGH
.
• The loudness of fan noise depends on the
ALTITUDE
setting.
Summary of Contents for LB75U - XGA LCD Projector
Page 61: ......
