26
27
Troubleshooting
必要
な
と
き
Care
Symptom
Probable cause
■
Pan-frying menu
•
Preheating time
is too long.
•
The actual
temperature
is different
from the set
temperature.
• The pan has been moved away from the IR sensor.
(P.14)
• The pan bottom or top plate is stained.
• Water, oil, or food was added while preheating.
• The temperature on the bottom of the pan may vary
from the set temperature depending on the type of pan.
→
Touch
to adjust the temperature as required.
• If the right IH heater is used at the same time,
preheating may take longer.
■
Deep-frying menu
•
Preheating time
is too long.
•
The actual oil
temperature
is different
from the set
temperature.
• The pot has been moved away from the IR sensor.
(P.14)
• The pot bottom or top plate is stained.
• More than 800
g
of oil has been added.
• Hot oil, brown-coloured oil, murky oil, or oil
fi
lled with
food sediment has been used.
• The oil temperature may vary from the set temperature
or preheating may take longer depending on the type,
material, and shape and size of the bottom of the pot.
→
Touch
to adjust the temperature as required.
Symptom
Probable cause
■
Sound and noise
Noise is heard
while heating.
• Various resonant sounds may be heard depending on the
type of cookware. You may feel small vibration when you
hold the handle, or the cookware may slightly move.
→
This is not a malfunction. Moving the cookware
slightly or replacing it may stop the sound.
• If the cookware is removed while heating, a short
metallic sound may be heard.
Even after the
main power
switch is turned
off, noise from the
fan is still heard.
• The cooling fan is operating because the inside of the
appliance is still hot.
( As the appliance cools down, it will automatically
stop.)
■
Heating power
The heating
power of the IH
heater seems
weaker.
•
Overheating prevention function
If the bottom of the cookware overheats, for example, by
preheating too long, the heating power will be reduced
automatically without changing the heat level indication.
( The heating power returns to normal after the
cookware cools down.)
• Cookware, such as ceramic and earthenware pots,
which cause the IH heater to overheat are used.
→
Do not use ceramic ware and earthenware even if
they are made for induction heating.
When both the right
and left IH heaters are
used simultaneously,
•
The heating
power is reduced
or a lower heat
level is indicated.
•
The heat level
cannot be
increased.
• The heating power is automatically controlled so that
overall power consumption does not exceed the limit.
(P.31)
* The heat level may decrease automatically.
Even after touching
, the level may not increase
and the appliance may beep.
