EN17
English
Error Indications
If any of the following error indication appears, please inspect the cause and resolve the problem.
If the following errors are solved, the appliance will automatically continue to heat up.
(See EN18 “Troubleshooting”)
●
If the problems above cannot be resolved or
errors are shown, please turn off the main
power and unplug the power plug immediately.
➜
Contact the authorised dealer or the Panasonic Service Center for details of the last 2 digits
of “ ”.
Crystal temperature sensor failure and overheating
protection
●
The air intake or the air exit is blocked by and
so forth, causing the insufficient rotation speed
of the fan. The heating power automatically
decreases when the heat level is not regulated.
➜
Clean any blockage.
Small object detection
●
When the bottom diameter of the pot is less
than 12 cm or no pot is placed.
➜
Please place a suitable pot.
Switch abnormality detection
●
When the operating key is covered by foreign
objects or stains for a long time.
➜
Remove foreign objects or stains covering the
operating key.
Error code
Cause and solution
Notes
