Panasonic KY-B64CA Operating And Installation Instructions Download Page 20

Page: 20 / 52

Selecting the Power Level

1. Touch

and hold the main power key to turn on

the power.

2. Select a cooking zone e.g. left front

3. Touch slider

(KY-B64CG)

or ‘+’ and ‘-’

(KY-B64CA)

to set the power level.

Power level adjustable range: 1 -

(18 levels).

Touch and hold the + / - keys to quickly change

the power level. See Power Level Guidelines on

page 28.

Boost Function

With a cooking zone power level set to 9, touching

boosts the power to the selected zone. After 10

mins the power level will return to 9.

4. Touch and hold the key of the cooking zone or

set the power level to “0” to turn off.

IH Cooking

WARNING

■

Stir liquids before heating.

Otherwise, ingredients may suddenly

splatter or cookware may move, and you may get burned or

injured.

■

Do not overheat the pan when preheating for stir frying and

pan frying.

CAUTION

Take care when preheating the pan with a small amount of oil.

The pan may overheat and get damaged.

NOTE

■

If no key is touched for a fixed period of time when a cooking zone

is in operation, a beep will sound and the cooking zone is turned off

automatically. See Auto switch off time table on page 32.

■

When the front and rear cooking zones are used simultaneously,

the heating power is regulated so that the overall power

consumption does not exceed the limit. For cooking zone groups

and its effects, see page 16.

Summary of Contents for KY-B64CA





















































Search results

Summary of Contents for KY-B64CA

Reviews:

Related manuals for KY-B64CA

Brands by name

Popular brands

Panasonic KY-B64CA, Operating And Installation Instructions

Search results

Summary of Contents for KY-B64CA

Reviews:

Related manuals for KY-B64CA

Brands by name

Popular brands