background image

4

For assistance, please visit http://www.panasonic.com/help

Attention:

Registering a handset to a base unit

1

Base unit:
KX-TG6311/KX-TG9361

Press and hold 

{

LOCATOR

}

 for 4 seconds. (No registration tone)

KX-TG6321/KX-TG9331/KX-TG9341/KX-TG9371

Press and hold 

{

LOCATOR

}

 for 4 seconds until the registration tone 

sounds.

L

If all registered handsets start ringing, press the same button to 
stop. Then repeat this step.

L

The next step should be completed within 90 seconds.

2

Handset:

Press 

{

OK

}

, then wait until a long beep sounds.

Note:

L

While registering, 

Base registering

 is displayed on all 

registered handsets.

L

If 

Error!!

 is displayed while registering, press 

{

OFF

}

 and register 

the handset again.

Display language

1

{

MENU

}

 

i

 

{#}{

1

}{

1

}{

0

}

2

{V}

/

{^}

: Select the desired setting.

3

Press the right soft key to save. 

i

 

{

OFF

}

A nickel metal hydride battery that is 
recyclable powers the product you 
have purchased.
Please call 1-800-8-BATTERY (1-
800-822-8837) for information on how 
to recycle this battery.

TGA630(e).fm  Page 4  Tuesday, December 25, 2007  2:40 PM

Summary of Contents for KXTGA630 - DIGITAL CORDLESS HANDSET INSTALL












Reviews: