Panasonic KXF-293C, Operating Instructions Manual

Page: 67 / 148

Page 4-3
DA
T
A
MODIFICA
TION
4
4-2 PCB Data
The board data is checked.
1
. Press PCB data .
• The board data screen appears.
2
. Correct data.
• Only the data of origin offset and the bad board
mark position can be corrected.
3.
Press .
• The data modification menu screen reappears.
• PCB size ..................... L corresponds to X direction of dispensing data, and W, the Y direction.
• Coordinate origin ....... The origin mark position is the coordinate origin (0, 0) viewed from
the front of machine.
• Origin offset ............... The offset for the whole board (mount, board recognition, and bad mark
coordinates).
• Bad PCB mark pos .... When this coordinate is marked, it is judged the false board and not
mounted.
293C-E-EMA04-A01-01
293C-EEn-DmPd-001