Panasonic KXF-193C Operating Manual Download Page 177

Page: 177 / 206

Page 7-1

193C-E-EMA07-A01-00

Chapter

MACHINE ADJUSTMENT

Machine Adjustment

Each movement of machine is adjusted.

7-1

Return to origin

All axes return to origin.

7-2

Width adjust

The width of board conveyor is adjusted.

7-3

Transfer oper

Transporting is carried out.

7-4

Board recognition

The board recognition is carried out.

7-5

Print operation

The squeegee moves up and down, and
carry out printing.

7-6

Mask cleaning

The mask cleaning is carried out.

7-7

Mask recog

The mask is recognized.

7-8

Solder supply

The solder is automatically supplied.

7-9

Test print

The solder is spread and printing is checked.

7-10

Squeegee open/close

The squeegee opens and closes.

7-11

Input check

Each input I / O is checked.

7-12

Output check

The output test of each output I / O is
carried out.

7-13

Axis info

The present state of each axis or error
information are displayed.

7-14

Recog unit maint

All recognition can be checked.

∗

For the corrected value at the lower right
part of screen, the corrected value of
board deviation got by the board and
mask recognition is displayed.

Summary of Contents for KXF-193C















































































































































































































Search results

Summary of Contents for KXF-193C

Reviews:

Related manuals for KXF-193C

Brands by name

Popular brands

Panasonic KXF-193C, Operating Manual

Search results

Summary of Contents for KXF-193C

Reviews:

Related manuals for KXF-193C

Brands by name

Popular brands