Panasonic KXF-033C, Operating Instructions Manual

Page: 34 / 46

Chapter 1 GENERAL DESCRIPTION Section 4 BASIC OPERATION
Page 4-2
4 - black
A switch to select the manual operation and the automatic operation
Manual operation : Function 7, 8, 10, 11 are possible.
Automatic operation : Automatic operation.
rotary
switch
5
(PB)
AUTO : To finish production.
This lamp will tune on.
Start the line to cancel this command.
8 - white
9 - - -
Whether magazines are there or not, down the lifter step by
step.
Decide the stop pitch with the "pitch" rotary switch.
When the machine produced boards which are as many as the
number of the counter which is set beforehand, the machine
will stop to produce automatically.
(PB)
(PB)
033C-E-OMA04-A01-01
Move the supply conveyor for a while till the magazine move to
the position of the limit switch.
Put a magazine into the lifter when the lifter is on the magazine
supply position, there is not a magazine on the lifter and a
magazine is on the position of the limit switch which is on the
supply conveyor.
PITCH
AUTO MANU.
rotary
switch
red
production
counter
(PB)
11 green
Move the discharge conveyor for a while after the magazine
move through the position of the limit switch. (Even if there is
not a magazine.)
10 green
(PB)
Whether magazines are there or not, down the lifter to the
magazine supply position.
(It is also to reset the machine when there is a trouble or an
error, about this, it is mentioned later.)
For each mode :
To emergency stop the machine.
7 - yellow
PROD. END
6 - red
EMERGENCY
STEP
TAKE OUT
MAGAZINE
PUT IN
MAGAZINE
RESET/ORIGIN
3 - black To decide the lifting height of the step of the magazine lifter
3
4
2
1