Panasonic KX-WT115 Operating Instructions Manual Download Page 50

Page: 50 / 60

Error Messages

Error Message

Possible Cause

Solution

Register Unit

The handset has been
cancelled or the handset has
not been registered.

Consult your dealer.

No Service

The handset is out of range.

Move closer to the CS.

The CS is turned off.

Make sure the power cord is
connected.

CS Busy

The CS is busy.

Try again later.

Charge Batt.

The handset batteries have
little charge remaining.

Charge the batteries fully. (See
"Charging the Batteries" on page
6.)

No Entries

When trying to view the
Phonebook: No items have
been stored. (See "Storing an
Item in the Handset
Phonebook" on page 32.)
When trying to view the
Incoming or Outgoing Call Log:
No logs have been stored.

Memory Full

The Phonebook is full and
cannot store the new item.

Remove unnecessary data in the
Phonebook and try again.

Insert battery

The handset was placed on the
charger without batteries.

Insert the batteries properly.

Use rechargeable
battery.

The wrong type of batteries
such as Alkaline or Manganese
was inserted.

Use only the rechargeable Ni-MH
batteries. (See "Accessories
(included)" on page 4 and
"Replacing the Batteries" on page
51.)

Troubleshooting and Error Messages

Summary of Contents for KX-WT115





























































Search results

Summary of Contents for KX-WT115

Reviews:

Related manuals for KX-WT115

Brands by name

Popular brands

Panasonic KX-WT115, Operating Instructions Manual

Search results

Summary of Contents for KX-WT115

Reviews:

Related manuals for KX-WT115

Brands by name

Popular brands