Panasonic KX WP1050 Operating Instructions Manual Download Page 53

Page: 53 / 236

Getting Started

For assistance, please visit http://www.panasonic.com/help

Setting

Description

[Connection Mode]

Select

[AP-DHCP]

for Connection Mode if the DHCP server

is operating in the router or modem with a built-in router you
are using. Select

[AP-Static]

if you want to assign Static IP

address.

[IP Address]

For

[AP-Static]

Enter the IP address and subnet mask corresponding to
your local network.

Set 4 numbers (0 – 255) separated by periods such as
“192.168.102.253”.

Note:

There are some restrictions on IP address entry. For
example, “0.0.0.0” and “255.255.255.255” are not available.

[Subnet Mask]

[Default Gateway]

For

[AP-Static]

Enter the default gateway address corresponding to your
local network by entering the IP address of your existing
router or modem with a built-in router, for example.

Set 4 numbers (0 – 255) separated by periods such as
“192.168.102.253”.

Note:

There are some restrictions on IP address entry. For
example, “0.0.0.0” and “255.255.255.255” are not available.

WP1050.book Page 53 Wednesday, November 22, 2006 9:24 AM

Summary of Contents for KX WP1050













































































































































































































































Search results

Summary of Contents for KX WP1050

Reviews:

Brands by name

Popular brands

Panasonic KX WP1050, Operating Instructions Manual

Search results

Summary of Contents for KX WP1050

Reviews:

Brands by name

Popular brands