"Authentication ID"
: Enter an authentication ID
(1–60 characters [alphanumeric, space, symbols])
(Page 116).
&
,
<
,
>
, comma (
,
), double quotation
mark (
"
) cannot be entered.
"Authentication Password"
: Enter an
authentication password (0–60 characters
[alphanumeric, space, symbols]) (Page 116).
&
,
<
,
>
, comma (
,
), double quotation mark (
"
) cannot be
entered.
Note
•
"Authentication ID"
and
"Authentication
Password"
can only be set when
"Authentication"
is set to
"ON"
.
•
While being entered, the characters of the
authentication password are displayed, but
once the settings are saved, all the
characters will be displayed as asterisks (*),
and you will no longer be able to check the
authentication password on the screen.
Record the authentication password
beforehand, and store it in a safe location.
•
When the authentication password is
displayed as asterisks (*), pressing
[Y]
deletes the entire authentication password.
"H.460"
: Use
[
][
]
to select
"ON"
or
"OFF"
(default).
•
This setting is available only when
"OFF"
is
selected for
"Static NAT"
"ON"
is selected for
"Gatekeeper"
.
Making Static NAT Settings
Note
•
To change the static NAT settings, it is
necessary to configure system settings,
including the port number settings. For details,
contact your dealer.
•
This setting is available only when
"IP
Address"
is set to
"Manual"
in
"Network
Settings"
1.
Login to the administrator menu (Page 101).
•
The admin menu screen is displayed.
2.
Press
[
]
.
•
The second page is displayed.
3.
Use
[
][
]
to select
"Static NAT Settings"
and
press
[Enter]
.
•
The Static NAT settings screen is displayed.
4.
Use
[
][
]
to select the following items for input:
"Static NAT"
: Use
[
][
]
to select
"ON"
or
"OFF"
(default).
Note
•
To select
"ON"
,
"H.460"
must be set to
"OFF"
on the H.323 settings screen
•
When
"ON"
is selected, the IP address of
the WAN side will be displayed for the unit
information on the Home screen (Page 27).
"WAN IP Address"
: Enter the WAN IP address of
the router.
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"RTP and RTCP for Audio"
: Enter the initial port
number (
5100
–
5194
) for RTP and RTCP for Audio
(default:
5100
).
"RTP and RTCP for Video"
: Enter the initial port
number (
5200
–
5294
) for RTP and RTCP for Video
(default:
5200
).
"Camera Control"
: Enter the initial port number
(
5300
–
5394
) for controlling a video camera (default:
5300
).
"SIP (2-Point)"
: Enter the port number for 2-party
video conference calls (
5000
–
5099
) for
communication using a SIP server (default:
5060
).
User Manual
105
Contacts and Settings
Summary of Contents for KX-VC300CN
Page 141: ...User Manual 141 Notes ...