Panasonic KX-UT248-B, Administration Manual

Page: 63 / 306

Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
HTTP Client
Settings HTTP Client Settings HTTP Version
*4
ü Page 88
HTTP User Agent
*4
ü Page 88
HTTP Authentication Authentication ID ü ü Page 88
Authentication Password ü ü Page 89
Proxy Server Settings Enable Proxy ü Page 89
Proxy Server Address ü Page 89
Proxy Server Port ü Page 89
Global Address
Detection Global Address
Detection Detection Method ü Page 90
Detection Interval ü Page 90
STUN Server STUN Server Address
*4
ü Page 90
STUN Server Port
*4
ü Page 91
Static NAPT
Settings Global IP Address Global IP Address
ü
Page 91
Enable Global IP
Address Usage per Line Line 1–Line x ü Page 92
External RTP Port Channel 1–25 ü Page 92
Application
Settings Application Settings Application Port
*4
ü Page 93
Enable Application
*4
ü Page 93
Application
Authentication Authentication ID
*4
ü Page 93
Authentication Password
*4
ü Page 94
*1 The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2 This setting can also be configured through other programming methods (phone user interface programming or configuration file
programming).
*3 If your phone system dealer does not allow you these settings, you cannot change them even though the unit shows the setting menu.
Contact your phone system dealer for further information.
*4 This setting can also be configured through configuration file programming.
*5 This setting can also be configured through phone user interface programming.
System
Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Web Language Web Language Language ü ü Page 94
Document Version 2012-06 Administrator Guide 63
4.1 Web User Interface Setting List