–
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
•
FQDN field
–
The field cannot contain ", &, ', <, >, or trailing spaces.
–
You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
–
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
•
Authentication ID/Password field
–
The field cannot contain ", &, ', :, <, >, or space.
–
The length of user password and administrator password must be from 6 to 16 characters.
•
Display Name field (
®
see
[Display Name]
in
–
This is the only field in which you can enter Unicode characters.
Result Messages
When you click
[Save]
after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Result Message
Description
Applicable Screens
Complete
The operation has successfully completed.
All screens except
Failed (Parameter Error)
The operation failed because:
•
Some specified values are out of range
or invalid.
All screens
Failed (Memory Access
Failure)
The operation failed because:
•
Access error to the flash memory
occurred while reading or writing the
data.
All screens
Failed (Transfer Failure)
The operation failed because:
•
A network error occurred during the
data transmission.
All screens
Failed (Busy)
The operation failed because:
•
The unit is in an operation that
accesses the flash memory of the unit.
All screens
•
When attempting to import/export the
phonebook data, the unit is on a call.
•
While transferring the phonebook data,
a call arrived at the unit.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
•
When updating the firmware, the unit is
on a call.
Failed (Canceled)
The operation failed because:
•
While transferring the phonebook data,
IP Reset was performed on the unit.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
•
While transferring the firmware file, IP
Reset was performed on the unit.
•
While transferring the phonebook data,
the connection with the unit was
interrupted.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
26
Administrator Guide
Document Version 2012-06
1.1.6 Web User Interface Programming
Summary of Contents for KX-UT248-B
