manualshive.com logo in svg

Panasonic KX-UT248-B, Administration Manual, Page: 146 / 306

Share
Download
Panasonic KX-UT248-B Administration Manual Download Page 146

Value Range

•

Yes

•

No

Default Value

Yes

Configuration File Reference

FIRM_UPGRADE_ENABLE (Page 175)

Update Type

Description

Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.

Note

•

This setting is available only when 

[Enable Firmware

Update]

 is set to 

[Yes]

.

•

Changing this setting may require restarting the unit.

Value Range

•

Automatic

•

Manual

Default Value

Automatic

Configuration File Reference

FIRM_UPGRADE_AUTO (Page 176)

Firmware File URL

Description

Specifies the URL where the firmware file is stored.

Note

•

This setting is available only when 

[Enable Firmware

Update]

 is set to 

[Yes]

.

•

Changing this setting may require restarting the unit.

Value Range

Max. 500 characters

Default Value

Not stored.

Configuration File Reference

FIRM_FILE_PATH (Page 176)

4.7.2  Local Firmware Update

This screen allows you to manually update the unit’s firmware from a PC by clicking 

[Update Firmware]

.

146

Administrator Guide

Document Version    2012-06

4.7.2 Local Firmware Update

Summary of Contents for KX-UT248-B



















































































































































































































































































































Reviews:

No comments