Panasonic KX-UT248-B, Administration Manual

Page: 223 / 306

Note
•
It is necessary to specify 2 digits for each of the 30 acoustic
settings (i.e., a total of 60 digits in succession). Even if you are
not changing a value, you must enter "00". The digit order
(offset) of each setting is as follows:
–
00 = Handset Sending Level (Wide Band)
–
02 = Handset Sending Level (Narrow Band)
–
04 = Handset Receiving Level (Wide Band)
–
06 = Handset Receiving Level (Narrow Band)
–
08 = Handset Sidetone Level (Wide Band)
–
10 = Handset Sidetone Level (Narrow Band)
–
12 = EHS Sending Level (Wide Band)
–
14 = EHS Sending Level (Narrow Band)
–
16 = EHS Receiving Level (Wide Band)
–
18 = EHS Receiving Level (Narrow Band)
–
20 = EHS Sidetone Level (Wide Band)
–
22 = EHS Sidetone Level (Narrow Band)
–
24 = Headset Sending Level (Wide Band)
–
26 = Headset Sending Level (Narrow Band)
–
28 = Headset Receiving Level (Wide Band)
–
30 = Headset Receiving Level (Narrow Band)
–
32 = Headset Sidetone Level (Wide Band)
–
34 = Headset Sidetone Level (Narrow Band)
–
36 = Reserved
–
38 = Reserved
–
40 = Reserved
–
42 = Reserved
–
44 = Reserved
–
46 = Reserved
–
48 = SP-PHONE Sending Level (Wide Band)
–
50 = SP-PHONE Sending Level (Narrow Band)
–
52 = SP-PHONE Receiving Level (Wide Band)
–
54 = SP-PHONE Receiving Level (Narrow Band)
–
56 = Reserved
–
58 = Ringer Volume Level
For example, the following line in a configuration file would
change the Handset Receiving Level (Wide Band) gain -3
decibels.
ADJDATA_GAIN = "0000FD00
…
00"
(… is the equivalent of fifty 0s.)
Default Value Empty string
ADJDATA_ATT (KX-UT113/KX-UT123/KX-UT133/KX-UT136 only)
Value Format Integer
Description Specifies the switching parameter for using the handset to make a call.
Value Range 0: Regular parameter
1: Extended parameter
Document Version 2012-06 Administrator Guide 223
5.5.4 Miscellaneous Telephone Settings