Panasonic KX-UDS124, Administrator'S Manual

Page: 213 / 292

NOM_DELAY
Value Format Integer
Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to "
MIN_DELAY
"
–
This value must be less than "
MAX_DELAY
"
Default Value 2
RTP_PORT_MIN
Value Format Integer
Description Specifies the lowest port number that the SIP-CS will use for RTP
packets.
Value Range 1024–45150 (even number only)
Note
•
The value for this setting must be less than or equal to
"
RTP_PORT_MAX
" - 4000.
•
Changing this setting may affect the number of simultaneous
calls that can be made. Therefore, when setting this parameter,
be aware that the maximum number of necessary ports can be
calculated as shown below:
No. of lines
´
No. of channels
´
2
´
1 (No. of terminals)
Default Value 16000
RTP_PORT_MAX
Value Format Integer
Description Specifies the highest port number that the SIP-CS will use for RTP
packets.
Value Range 5024–49150 (even number only)
Note
•
The value for this setting must be greater than or equal to
"
RTP_PORT_MIN
" + 4000.
•
Changing this setting may affect the number of simultaneous
calls that can be made. Therefore, when setting this parameter,
be aware that the maximum number of necessary ports can be
calculated as shown below:
No. of lines
´
No. of channels
´
2
´
1 (No. of terminals)
Default Value 29000
Document Version 2013-03 Administrator Guide 213
4.5.2 RTP Settings