Section 4 Special Features
28
The VPS is also able to notify your beeper with the callback number of the party who
left the message. The telephone number stored on the VPS for your beeper must
include the beeper display command.
Three features can be set for message waiting notification: Message Waiting Lamp
Status, Change Device Status, and Assign Telephone Number. These features can be
set by the System Administrator or at a subscriber telephone. You must enter a distinct
phone number to each device.
WHEN YOU PRESS 2
• The System Administrator or the System Manager must authorize this
feature before it can be used.
•
Message Waiting Lamp Notification Setting
The VPS illuminates the message waiting lamp of your extension when
your mailbox has a new message recorded.
•
Setting Device Status
For each device, the notification can be continuous, disabled, or enabled to
a preset schedule. Only the System Administrator can set the notification
to a preset schedule.
•
Notification Number Assignment
You can set up to 3 telephone or beeper numbers to ring when you wish to
receive notification calls.
To change the Message Waiting
Lamp Status
To change the Device Status
To assign a telephone or beeper no.
1
2
3
Log into your mailbox.
Press 6.
Subscriber’s
Main Menu
6
Press 2.
Press the desired button.
2
On-hook.
Make your selection.
2
1
To Change
To Accept
WHEN YOU PRESS 1
On-hook.
Select the status.
1
To use for scheduling
2
To use continuously
3
To not use at all
Enter the device number (1-3).
Device No.
