Panasonic KX-TVP200BX Service Manual Download Page 143

Page: 143 / 448

Installation

2-13

POWER

SLOT 1

SLOT 2

SLOT 3

2.2.3

Extension or CO Line Connection

The VPS must be connected to extension or CO line before using the system. Up
to eight lines can be connected to the modular jacks on the Port card.

Warning: No other apparatus should be connected in parallel with this apparatus

on the same line. Such connection may cause unsatisfactory operation
and would invalidate the approval.

To connect telephone lines:

Note:

The screws are attached to the front cover with springs so that they will not
be lost.

2.2

Installation

Panasonic

TVP200

VOICE PROCESSING SYSTEM KX-TVP200

Loosen two screws on the right side of the main unit, then open the front cover
in the direction of arrow A .

screw

Insert a screwdriver into the opening of the ferrite core and open it.

Summary of Contents for KX-TVP200BX

































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP200BX

Reviews:

Related manuals for KX-TVP200BX

Brands by name

Popular brands

Panasonic KX-TVP200BX, Service Manual

Search results

Summary of Contents for KX-TVP200BX

Reviews:

Related manuals for KX-TVP200BX

Brands by name

Popular brands