Panasonic KX-TVP200 Installation Manual Download

Page: 296 / 408

SYSTEM MANAGER'S GUIDE

296

Installation Manual

SETTING COS (CLASS OF SERVICE)

PARAMETERS

Class of Service defines the set of VPS services available to mailbox owners. A maximum of
64 Class of Services can be established. Each Class of Service can be set using the telephone.
COS No.63 and No.64 are assigned to the Message Manager and the System Manager
respectively.
For a complete explanation of COS parameters, please see Table 39 and T able 40 in
B3

SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE)

PARAMETERS.

Follow the steps detailed below to set the following Class of Service parameters:

•

Personal Greeting Length—Length ranges from 8-60 s in increments of 4 s.

•

New Message Retention Time—Maximum time is 30 days.

•

Saved Message Retention Time—Up to 30 days/0: Unlimited.

•

Message Length—Length ranges from 1-6 min/0: Unlimited.

•

Number of Messages—The number of messages range from 5-100.

•

Total Message Time—Total message time ranges from 5-100 min/0: Unlimited.

•

Message Retrieval Order—Settings are LIFO (Last In First Out) or FIFO (First In First
Out).

•

Message Scanning with Information—Settings are enable or disable.

•

Play System Prompt after Personal Greeting—Settings are enable or disable.

•

Call Waiting on Busy—Settings are enable or disable.

•

Message Cancel for Live Call Screening—Settings are enable or disable.

•

Direct Mailbox Access—Settings are enable or disable.

•

Intercom Paging Group Number—1-17

•

Subscriber Service Prompt Mode

1. System Prompt
2. User 1 Prompt
3. User 2 Prompt

•

Remote Call Forward to CO—Settings are enable or disable.

•

Delete Message Confirmation—Settings are enable or disable.

•

Number of Caller IDs for Personal Caller Name Announcement—0-30

•

Play Personal Greeting for Caller ID—Settings are enable or disable

•

Caller ID Screening—Settings are enable or disable

•

Message Notification—Settings are enable or disable

•

External Message Delivery—Settings are enable or disable

•

Auto Forwarding—Settings are enable or disable

Not available for COS No.63 (Message Manager) and COS No.64 (System Manager)

Not available for COS No.64 (System Manager)

Summary of Contents for KX-TVP200

























































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP200

Reviews:

Related manuals for KX-TVP200

Brands by name

Popular brands

Panasonic KX-TVP200, Installation Manual

Search results

Summary of Contents for KX-TVP200

Reviews:

Related manuals for KX-TVP200

Brands by name

Popular brands