System Administrator
4-73
4.5.5
System Parameter Settings
Announcement
Repeat Cycle
Intercom
Paging Retry
Paging Code
for Group 1–8
1–3 times
(1)
1–10 times
(2)
Up to 12
numeric
characters for
each group
(None)
Value Range
(default)
Specifies the number of times that the intercom
paging announcement should be repeated.
Example:
There is a call for <mailbox owner’s name>.
Specifies the paging retry times when the paged
destination is busy or if there is no answer.
Specifies the intercom paging access code required
by the PBX.
[Note]
Intercom paging group number available for each
Subscriber is determined on a COS-by-COS basis.
Intercom
Paging
Group
p.4-30
4.5.5.6.8 Fax Management
Transfers incoming fax calls to a fax extension.
Up to two fax extensions can be specified as the destinations of automatic fax
transfer so that one serves as a backup for the other.
If the main fax extension is not available to receive a fax call, the VPS will transfer
it to the alternate fax extension.
System Administration Top Menu
→
1
→
5
→
6
→
8
Parameter
Description/Function
Reference
Program – System Parameter – Others – Fax Management Menu
Automatic Transfer of Incoming Fax Call -------------------- :
Disable
Main Fax Extension No. ------------------------------------------- :
. . .
Alternate Fax Extension No. ------------------------------------- :
. . .
Fax No-answer Time (5-60 sec) -------------------------------- :
10
Fax Manager Mailbox No. ----------------------------------------- :
. . .
Fax No-answer Coverage Mode -------------------------------- :
No
Fax Notification Mode ---------------------------------------------- :
No
