Panasonic KX-TVM50 Programming Manual Download Page 79

Page: 79 / 200

2.4 Service Settings

Programming Guide

Value Range

YY/MM/DD (YY: Year, MM: Month, DD: Day)

Feature Guide References

2.3.22 Holiday Service

Start Time

Specifies the start time of the holiday.

Value Range

HH:MM (HH: Hour, MM: Minute)

Feature Guide References

2.3.22 Holiday Service

End Date

Specifies the end date of the holiday.

Value Range

YY/MM/DD (YY: Year, MM: Month, DD: Day)

Feature Guide References

2.3.22 Holiday Service

End Time

Specifies the end time of the holiday.

Value Range

HH:MM (HH: Hour, MM: Minute)

Feature Guide References

2.3.22 Holiday Service

Retain Holiday

Stores the Holiday Service setting for future use. If set to "Yes", the same setting will function
automatically on the same day every year. If set to "No", the setting will be cancelled automatically
after the holiday is over.

Summary of Contents for KX-TVM50









































































































































































































Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands

Panasonic KX-TVM50, Programming Manual

Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands