Panasonic KX-TVM50, Programming Manual

Page: 132 / 200

2.5 System Parameters
132 Programming Guide
Maximum Call Duration
Specifies the maximum duration of calls. If the VPS detects no DTMF signals for the specified amount
of time, it terminates the call.
Value Range
0 min–60 min
Transfer to Outside
These parameters determine how the VPS will transfer calls to Trunk via the following features: Call
Transfer Service, Custom Service, Personal Custom Service, Caller ID Callback.
Outside Transfer Sequence
Call Transfer to Outside Sequence
Specifies the sequence the VPS uses to transfer calls to Trunks.
Value Range
Max. 16 digits consisting of 0–9, , # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
1–9, 0, , #: Dial Codes
Feature Guide References
2.3.6 Call Transfer to Outside
Call Transfer to Outside Reconnect Sequence on Busy
Specifies the sequence the VPS uses to reconnect the line when the transferred party is busy.
Value Range
Max. 16 digits consisting of 0–9, , # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling