Panasonic KX-TVM50, Installation Manual

Page: 48 / 200

2.7.1 2-Port Hybrid Expansion Card (KX-TVM502)
Each KX-TVM502 adds 2 ports to the VPS which can be used for DPT, Inband, or No Integration.
KX-TVM502 cards can be installed in slots 2 and 3 of the VPS.
Note
•
When using APT Integration, only the factory-installed jacks can be used.
Integration Type
Basic Configuration
Maximum Configuration
KX-TVM502
´
2
No. of Usable
Jacks
No. of Ports
No. of Usable
Jacks
No. of Ports
DPT Integration 1
*1
2 3 (1 per card)
*1
6
Inband/No Integration 2 2 6 6
*1 When using DPT Integration, only odd numbered jacks (1, 3, and 5) can be used. Each jack provides 2 VPS ports.
Included Items
Screw
´
2
Installation
1.
Position the front of the card so that the jacks fit in the open slot. Holding the card firmly in place, lower the
other end of the card so that the card’s hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in damage
to the VPS.
2
1
Extension Bolt
48 Installation Manual Document Version 2.1 2008/04
2.7.1 2-Port Hybrid Expansion Card (KX-TVM502)