9
power level of the device to ensure it only uses the minimum level required to communicate
with the network.
ICNIRP (http://www.icnirp.org)
*1
This device was tested for typical body-worn operation with the back of the phone kept
0.5 cm from the body.
*1
Operating time is dependent upon usage environment, battery age and condition. Values
were calculated according to GSMA TS.09.
*2
The incoming call indicator and message indicator flash when there is a missed call or
a new message is received. The standby time will be shortened when you leave the
indicator flashing.
Specifications
●
Standard:
Dual band GSM 900/1800 MHz
Bluetooth version 3.0, Class 1
USB version 2.0
●
Display:
TFT colour 2.4-inch
(QVGA: 240 x 320 pixels)
●
Camera:
0.3 MP
●
Frequency range:
GSM900 890.2-914.8 MHz
935.2-959.8 MHz
GSM1800 1710.2-1784.8 MHz
1805.2-1879.8 MHz
Bluetooth: 2.402-2.48 GHz
●
RF transmission power:
GSM 900: 2 W (max.),
GSM 1800: 1 W (max.)
Bluetooth: 2.5 mW (max.)
●
Power source:
100–240 V AC, 50/60 Hz
●
Power consumption (when charging):
Standby: Approx. 0.6 W
Maximum: Approx. 2.5 W
●
Operating/Charging conditions:
Operating: 0 °C – 40 °C, 20 % – 80 %
relative air humidity (dry)
Charging: 5 °C – 40 °C
●
Battery:
Li-Ion 3.7 V/1,400 mAh
●
Battery performance (supplied):
Talk time: Approx. 7.0 hours
*1
Standby time: Approx. 150 hours
*1, *2
●
Antenna:
Internal
●
SIM card type:
1.8 V/3 V
●
Memory card type:
microSD, microSDHC up to 32 GB
(not supplied)
2 General information
●
This phone is designed to operate on GSM network - GSM 900/1800 MHz.
●
This equipment is designed for use in Germany, Italy, Spain, France, Netherlands, Czech
rep., Poland, Hungary
●
In the event of problems, you should contact your equipment supplier in the first instance.
●
For use in other countries, please contact your equipment supplier.
