manualshive.com logo in svg

Panasonic KX-TS620FX, Operating Instructions Manual, Page: 47 / 60

Share
Download
Panasonic KX-TS620FX Operating Instructions Manual Download Page 47

Answering System

47

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than 
3 minutes. New messages cannot be recorded when:
— “

Memory full

” is heard.

— “

Message full

” is displayed.

— The MESSAGE indicator flashes rapidly (only when the Answering System is ON).
Erase some, or all, of the messages. We recommend you erase unnecessary 
messages after each playback.

Erasing a specific message

Press 

{

ERASE

}

 while the message you want to erase is being played.

• The unit erases the message.
• A short beep will sound and the unit will continue to play the next message.

Erasing all messages

All recorded messages, except the greeting message, can be erased at one time.

 

1

Press 

{

ERASE

}

.

• “

To erase all messages press ERASE 

again

” is heard.

2

Within 10 seconds, press 

{

ERASE

}

 again.

• A long beep sounds and “

No message

” 

is heard. The display shows 

“

 message

”.

• The information in the Caller List will not be erased. To erase Caller List information, see 

page 30.

MESSAGE Indicator

{

ERASE

}

TS620FX.book  Page 47  Monday, July 17, 2006  4:00 PM

Summary of Contents for KX-TS620FX





























































Reviews:

No comments