Panasonic KX-TS560ML Operating Instructions Manual Download

Page: 8 / 28

Preparation

Battery installation and
replacement

Installing the batteries

Press down in the direction of the arrow
and open the cover (

Install the batteries in the proper order
as shown (

), matching the correct

polarity.

Close the battery cover.

≥

After battery installation, the unit will reset
and “

SET CLOCK

” will always display until

the time is set.

≥

To set the clock, see page 12.

≥

Batteries are not included with the unit.

≥

Install three high quality “AA” size Alkaline
(LR6) or Manganese (R6, UM-3) batteries. We
recommend to use Panasonic batteries.
Battery life is:

about six months when using
Alkaline batteries.

about three months when
using Manganese batteries.

≥

Battery life may depend on usage conditions
and ambient temperature.

≥

Make sure batteries were inserted properly
inphase to ensure the functionality of this unit.

Replacing the batteries

If “

” flashes, the battery power is low.

Install new batteries as soon as possible.
If batteries are not replaced even after the

“

” is displayed, the unit may not work

properly.

≥

Store the desired items in the phonebook,
because after the battery replacement, the
information stored in the redial list will be
cleared.

Disconnect the telephone line cord from
the unit.

Press down in the direction of the arrow
and open the cover.

Replace the batteries with new ones
using correct polarity (+, –), and close
the cover.

Connect the telephone line cord to the
unit.

THE UNIT MAY NOT WORK PROPERLY
WITHOUT BATTERIES.

Battery precautions:

The batteries should be used correctly,
otherwise the unit may be damaged by
battery leakage.

do not mix different types of batteries.

do not charge, short-circuit, disassemble,
heat or dispose of in fire.

remove all the batteries when replacing.

Note:

if you do not install the batteries or if the
battery power is low, the display will become
blank. Readjust the time after the battery
replacement.

replace all the batteries every six months if
using Alkaline batteries, or misoperation may
occur. (When you use Manganese batteries,
replace all of them every three months.)

do not use nickel-cadmium batteries.

KX-TS560ML.book Page 8 Monday, November 10, 2008 2:29 PM

Summary of Contents for KX-TS560ML





























Search results

Summary of Contents for KX-TS560ML

Reviews:

Related manuals for KX-TS560ML

Brands by name

Popular brands

Panasonic KX-TS560ML, Operating Instructions Manual

Search results

Summary of Contents for KX-TS560ML

Reviews:

Related manuals for KX-TS560ML

Brands by name

Popular brands