Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp
65
Ringer tone
You can change the ringer tone heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1
{
MENU
}
(center of joystick)
i
f
i
{
SELECT
}
2
“
Ringer for cell
”
i
{
SELECT
}
3
“
Ringer tone
”
i
{
SELECT
}
4
Select the desired item. (Default: “
Tone
3
”)
i
{
SAVE
}
i
{
OFF
}
Note:
L
If you erase a customized ring for
cellular call, “
Tone 3
” (default) is used
instead of that ringer tone.
1
{
MENU
}
i
f
i
{
SET
}
2
“
Ringer for cell
”
i
{
SET
}
3
“
Ringer tone
”
i
{
SET
}
4
Select the desired item. (Default: “
Tone
3
”)
i
{
SET
}
i
{
STOP
}
Selecting which unit to ring
^
You can select which handset or base unit
rings when you receive a call from one of
the registered cellular phones.
1
Press the desired CELLULAR SELECT
button (
{
1
}
to
{
5
}
).
2
“
Assign Base/HS
”
i
{
SET
}
3
Select the desired unit, then press
{
>
}
.
(Default: “
All
”)
L
The selected units are indicated by
“
Q
”.
L
To cancel a selected unit, press
{
>
}
again.
4
{
SET
}
i
{
STOP
}
Answering system settings for
cellular calls
^
Setting the answering system for a
cellular call
This feature allows the base unit to answer
cellular calls when you are not available to
answer cellular calls.
Important:
L
To use this feature, you need to turn on
the answering system for line 1 and/or
line 2 (page 50).
L
If this feature is turned on, the base unit
plays the greeting message for line 1
and message is recorded on line 1.
1
{
MENU
}
i
A
i
{
SET
}
2
“
TAD for cell
”
i
{
SET
}
3
“
TAD (cell)
”
i
{
SET
}
4
Select the desired setting. (Default:
“
Off
”)
i
{
SET
}
i
{
STOP
}
Note:
L
“
TAD
” stands for Telephone Answering
Device.
Handset
Base unit
TH112(e).book Page 65 Thursday, June 8, 2006 11:07 AM
