C
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp
21
Making calls
Using the handset
Y
1
Lift the handset and dial the phone
number.
L
To correct a digit, press
{
CLEAR
}
.
2
{C}
L
An available line is automatically
selected and the line number is
displayed.
3
When you finish talking, press
{
OFF
}
or
place the handset on the base unit or
charger.
Note:
L
You can also select a line by pressing
{
LINE1
}
or
{
LINE2
}
in step 2.
L
To change the line selection, see page
46.
L
While on a call, you can switch from the
handset to the base unit or another
handset by:
– pressing
{
LINE1
}
or
{
LINE2
}
twice on
the base unit.
– pressing
{
LINE1
}
or
{
LINE2
}
twice on
another handset.
Using the speakerphone
1
Lift the handset, dial the phone number,
and press
{s}
.
L
Speak alternately with the other party.
2
When you finish talking, press
{
OFF
}
or
place the handset on the base unit or
charger.
Note:
L
Use the speakerphone in a quiet
environment.
L
To switch to the receiver, press
{C}
.
Adjusting the receiver/speaker volume
Push
{^}
or
{V}
while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1
{
REDIAL
}
2
Push
{^}
or
{V}
to select the desired
number.
L
To erase the displayed number, press
{
CLEAR
}
.
3
{C}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service. When storing a calling card
access number and/or PIN in the
phonebook, a pause is also needed (page
27).
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1
{
9
}
i
{
PAUSE
}
i
Dial the phone
number.
2
{C}
Note:
L
A 3.5 second pause is inserted each
time
{
PAUSE
}
is pressed. Press
repeatedly to insert longer pauses.
TH112(e).book Page 21 Thursday, June 8, 2006 11:07 AM