Panasonic KX-TGP600G, Operating Instructions Manual

Page: 57 / 132

Making Calls
R To enter characters, see “Entering Characters”, Page 54.
R You can confirm that the number was dialed correctly before calling (Predialing) by entering the
number, then
KX-TPA60:
Press
.
KX-TPA65/KX-TPA68:
Off-hook
R To clear an entire number while predialing,
KX-TPA60:
Press
/ /[XFER/CLR] for more than 1 second.
KX-TPA65/KX-TPA68:
Press
/ /[TRANSFER/CLEAR] for more than 1 second.
R To cancel dialing, press
KX-TPA60:
KX-TPA65:
/[CANCEL]
KX-TPA68:
[CANCEL]
R If flashes, move closer to the base unit and dial again.
R To insert a 3 second pause between phone numbers, press
P
/ Pause
*1
.
It is useful when you want to operate voice mail service without listening to pre-recorded
announcement, for example. Repeat as needed to create longer pauses.
*1 This soft key is displayed only when configured on the telephone. Contact your administrator for
further information.
Basic Calling
Calling by Dialing
1. KX-TPA60:
KX-TPA65/KX-TPA68:
Off-hook
2. Dial the outside party’s number.
3.
CALL
/ Call
4. KX-TPA60:
: End the call
KX-TPA65/KX-TPA68:
On-hook: End the call
Note
KX-TPA60/KX-TPA65:
To dial a new number without going on-hook, follow the procedure below.
57
Making Calls